Awning Mounting Bracket - singles

This awning fitting bracket has welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off-road or under extreme conditions.

Add 2 or 3 to the shopping cart depending on requirements.

Zinc plated and black powder coated for corrosion resistance and designed to mount either upright or inverted.

Bracket is 50mm wide. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength.

The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning.